This New Toro Beast 200A Brushless ESC is an upgrade of TORO EX200A for 1/5 scale car. It is usable with 4S to 8S LiPo packs and comes with a 6 /7.4V@15A BEC system and can be widely programmed by Program box or SKYLINK USB interface .
This upgrade Toro Beast 200A has more advantages, one of main features is it is a BEC ESC,and the BEC is adjustable with 6V15A or 7.4V/15A. It also has new high performance heat dissipation power boards ,bearings and lowest resistance . It easily runs up to 10 horse power range applications with these advanced features.
Built-in high power BEC. The Output voltage of built-in BEC is
selectable between 6.0V and 7.4V and with 15A Maximum output
current .
Support LiPo batteries up to 8S.
Data Logging: The controller can measure and record parameters
such as your battery volts,amp draw, motor rpm, and controller temperature.
Red copper connector is used internally of the ESC. It can decrease
the internal resistance at high current situation.
Heat transfer: The internal resistance can be reduced by laminated
copper stack control technology so that the dynamic thermal
equilibrium can be got.
The users could preset and store 10 sets of profiles in the ESC. These data could be called out for application at any time without any special program setting. The user could also reset the profile according to his request.
Low voltage protection
Motor and ESC overheat protection
Signal lost protection
The firmware can be updated by connecting the ESC with PC or smart phone.
The ESC can be programmed by program box, PC (connected with SKYLINK) or smart phone via Wi-Fi module.
1. PC via SKYLINK (optional part SK-600013)
2. Smart Phone via Wi-Fi Module (optional part SK-600075)
3. Program Box (optional part SK-300046)
Dimensions
Weight359g (without wire)
Constant/Burst Current200A/800A
Motor CompatibleBrushless Sensorless ESC
Car Compatible1/5 Off Road, On Road
Motor LimitsKV¡Â1100, 4 Poles
Resistance0.0002ohm
Battery Cell Count4-8S LiPo
BEC Output6.0V/7.4V @ 15A