»óÇ°»ó¼¼Á¤º¸Accessories: Front Shock Towers-1PCS Rear Shock Towers-1PCS Damper-4PCS C-Hubs-2PCS Front Knuckle Arm-2PCS Rear Knuckle Arm-2PCS Front Lower Arm-2PCS Rear Lower Arm-2PCS Front Tie Rods + Stabilizer-3PCS Rear Tie Rods + Stabilizer-3PCS Tie Rods-9PCS Steering-3PCS Stainless Steel Round Head Screw 3x16-8PCS Stainless Steel Round Head Screw 3x18-4PCS White Delrin Collar-4PCS Stainless Steel Flat Head Screw 3x10-14PCS Stainless Steel Round Head Screw 3x8-2PCS Stainless Steel Round Head Screw 3x14-12PCS Stainless Steel Round Head Screw 3x12-10PCS Stainless Steel Flat Head Screws 3x18-4PCS Stainless Steel Flat Head Screws 3x14-1PCS Stainless Steel Round Head Screws 3x6-2PCS Alloy Collar 3x6x2-4PCS POM Collar-4PCS Aluminum Collar 3x6x3-2PCS White Delrin Collar 6x10x3-2PCS White Delrin Collar 5x8x2.5-2PCS Copper Collar-2PCS CVD-4PCS Brake Disk-2PCS
Original Name / Part No: 8338+8360+8337+8332+8352+8333+8341+8343
Product major functions & usage: 1.Stabilize and adjust the angle of the shocks 2.Absorb the impact to balance the chassis 3.To connect the front arms and knuckle arm in unison with the entire steering assembly 4.Work with steering tie rods to improve steering 5.Support the chassis and stabilize the dampers and C hubs 6.Stabilize rear CVD shaft, rear arms and rear upper tie rod so the car could stay good balance 7.Support the chassis and stabilize the dampers and 8.Adjust the steering performance
Major advantages of upgrading to this part/product : 1. This part is made with a quality light weight high tensile strength aluminum 6061 T6 for a stable performance and modified to have a more 3D looking appearance.
2. Multiple positioning holes designed to adjust the angle of the shocks based on your needs. 3. Coil length is thickened from 1.75mm to 2mm in order to be more sturdy. High concentration oil is used to increase stability. 4. Length of damper is shortened from 55mm to 53mm (front) and 50mm (rear) so the vehicle is closer to the ground (from 11mm to 8mm) which will be more stable when in motion.
5. Based on the different height of front and rear, the product is designed with different length (front 53mm, read 50mm) to balance the vehicle. 6. Damper shaft is thickened from 3mm to 3.5mm in order to be more sturdy and prevent bending. 7. Delrin collars are designed and hand installed to eliminate the gap, friction with the friction causing parts, so that the handling performance is top rated and in harmony with the rest of the vehicle.
8.F+R knuckle arms with multiple positioning holes designed to adjust the angles of the dampers that suits different play modes. 9. Counter-clockwise thread, adjustable length for the tie rod. 10. This new innovative triangular design gives stronger stability yet retains the overall needed flexibility
Suitable Model: 1/10 4WD FORD GT4-TEC 2.0 1/10 4WD 4-TEC 3.0 CORVETTE STINGARY-93054-4
|